A Cummins 6BT cylinder head is a vital component of the Cummins 6BT engine, a 5.9-liter turbocharged diesel engine widely used in trucks, buses, construction equipment, marine vessels, and generators. The cylinder head sits above the cylinders, forming the roof of the combustion chamber, and houses passages for air and fuel delivery while allowing exhaust gases to exit. It also contains essential components like valves and fuel injectors.Ruich Value is a trusted manufacturer of high-quality cylinder heads for Cummins engines, employing advanced technology and stringent quality control to ensure our products meet or exceed original specifications. Our cylinder heads are designed for reliability, efficiency, and cost-effectiveness.
Features
- High Hardness: Our cylinder heads are heat-treated at 855°C-865°C for 30-40 minutes and quenched in oil, enhancing durability and extending service life by three times compared to standard cast iron heads.
- Low Friction: The finely polished inner surface minimizes friction between piston rings and headwalls, creating a thin lubricant film that further reduces resistance.
- Good Sealing: Our designs ensure a tight seal between piston rings and headwalls, preventing charge leakage during compression and exhaust gas escape, thereby improving engine performance.
- Effective Heat Transfer: The cylinder heads efficiently transfer heat from the combustion chamber to the coolant, preventing overheating and thermal stress on engine components.
- Easy Installation and Replacement: Designed for a perfect fit into the Cummins cylinder block without requiring machining or modification, our cylinder heads are straightforward to install or replace when necessary.
Product Info
The product info of our cylinder heads for Cummins Cylinder Head 6BT is as follows:
| Parameter | Data | Source |
|---|---|---|
| Manufacturer | Ruich Value | Ruich Value |
| Model | Cummins 6BT Cylinder Head | Wikipedia |
| Material | Cast Iron | Wikipedia |
| Compression Ratio | 17.2:1 to 19:1 | Wikipedia |
| Valvetrain | Cam-in-block, 2 valves per cylinder | Wikipedia |
| Bore x Stroke | 102 mm x 120 mm (4.02 in x 4.72 in) | Wikipedia |
| Displacement | 5.9 L (359 cu in) | Wikipedia |
| Power Output | 160 hp (119 kW) | Crossmembers |
| Torque | 400 lb-ft | Crossmembers |
| Compatible Engines | Dodge RAM, Ford Trucks, Chevy Trucks | Crossmembers |
| Technical Support | Ruich Value | Ruich Value Contact |
Other Related Models
We also produce cylinder heads for other related models of Cummins engines, such as:
| Cylinder Head Model | Cylinder Head Model | Cylinder Head Model |
|---|---|---|
| CNT855 (Assm) | K19 (Assm) | 4B/4BT (Assm) |
| 6B/6BT (Assm) | ISBE -6D 5.9 (Assm) | ISF2.8 (Assm) |
| ISF3.8 (Assm) | ISDE-4D 4.5 | ISDE-4D |
| ISDE -6D/QSB6.7（Assm) | ISC (Assm) | ISX15/QSX15 |
| ISLE | 6LT | NH220 |
| M11 | A2300 | NT855/D85 |
| B | 6CT/6CTA 8.3 |
Contact Us
We’re committed to delivering top-tier engine components. If you have any questions or inquiries about our Cummins 5BT Cylinder Head, please don’t hesitate to contact us. Our team is ready to assist you.
