Cummins Cylinder Head 6BT

Cummins Cylinder Head 6BT

Introduction

A cylinder head is a crucial component of an internal combustion engine that sits above the cylinders and forms the roof of the combustion chamber. It contains passages that deliver air and fuel to the cylinders, and allow exhaust gas to exit. It also contains the valves, spark plugs, and fuel injectors that control the flow of air, fuel, and combustion products.

The Cummins Cylinder Head 6BT is a high-performance cylinder head for the Cummins 6BT engine, a 5.9-liter turbocharged diesel engine that powers various models of trucks, buses, construction equipment, marine vessels, and generators. The engine has six cylinders, each equipped with a cylinder head made of cast iron or aluminum alloy. The cast iron material has high strength and durability, while the aluminum alloy material has high thermal conductivity and light weight.

Ruich Value is a reputable manufacturer and supplier of premium-quality cylinder heads for Cummins engines. We use state-of-the-art technology and strict quality control measures to produce cylinder heads that meet or exceed the original specifications. Our cylinder heads are reliable, efficient, and cost-effective.

Features

Some of the features of our cylinder heads for Cummins Cylinder Head 6BT are:

• High hardness: Our cylinder heads are hardened by heating to 855°C-865°C for 30 to 40 minutes and then quenched in oil. This increases the life of the head by three times compared to gray iron or cast iron cylinders.
• Low friction: Our cylinder heads have a finely polished inner surface that reduces friction between the piston rings and the headwalls. A thin film of lubricant is generated on the inner surface of the head, which further decreases the resistance due to friction.
• Good sealing: Our cylinder heads provide a tight seal between the piston rings and the headwalls, preventing leakage of charge during the compression stroke and exhaust gases during the exhaust stroke. This improves the engine performance and efficiency.
• Effective heat transfer: Our cylinder heads transfer heat from the combustion chamber to the coolant efficiently, preventing overheating and thermal stress of the engine components. In case of wet liners, the heat is directly transferred from the cylinder head to the coolant at a lower temperature.
• Easy installation and replacement: Our cylinder heads are designed to fit perfectly into the cylinder block of Cummins Cylinder Head 6BT, without requiring any machining or modification. They are also easy to remove and replace when worn out or damaged.

Product Info

The product info of our cylinder heads for Cummins Cylinder Head 6BT is as follows:

Material	Cast iron or aluminum alloy
Production process	Heating, quenching, polishing
Application	Cummins Cylinder Head 6BT
Engine type	Diesel
Engine model	Various models of trucks, buses, construction equipment, marine vessels, and generators
Year	Various years
CC	5.9L
Horse power	Various ratings
Cylinder number	6

Other Related Models

We also produce cylinder heads for other related models of Cummins engines, such as: